ARE YOU INTERESTED IN THIS PRODUCT?
Description
Specific range of SANCOL PVC reinforced building evacuation tube Ø 100 with joint, for the evacuation of waste or rain water or when high crushing resistance is required.
The joint connection allows the movements of the ground to be absorbed whilst preserving a perfect seal.
ATE has developed a unique comb palletisation system that ensures perfect support for the tubes when they are unpacked. They also limit the deformation of the tube that often occurs when they are unpacked.
Features
| Resistance | SN4 | SN8 |
|---|---|---|
| Diameter (mm) | Ø100 | Ø100 |
| Colour | Blue / white line | Blue / white line |
| Length of bar (ml) | 2/3/4 | 2/3/4 |
| Palletisation (ml) | 160/240/320 | 160/240/320 |
FAQ
For connections with tubes to be glued in place, a blank assembly is required. You have to strip and glue, then fit everything together in a very short space of time. Experience has shown that glue weakens the pipe and it becomes brittle when the pipe is buried.
For connections with jointed pipes, it is possible to have a well-installed network if you take your time. Then you can readjust the connections. The jointed pipe and fittings can withstand bending and movement due to ground settlement, but there will be no breakage at the fittings. They therefore guarantee a watertight seal.
It is not currently possible to install SANCOL in a slab or under a slab.
There’s no difference between bonded and jointed pipes. Root invasion can only be prevented by using an anti-root fabric.
Yes, the SANCOL tube can be used to evacuate a building if the flow rate does not exceed the capacity of a ø 100.
Yes, the SANCOL pipe can be used to evacuate a building if the flow rate does not exceed the capacity of a ø 100.
The joint is made of rot-proof material, so it has the same lifespan as the pipe.
Yes, the grease will facilitate the connection and readjustment (angulation) will be possible if necessary.
We recommend SN8 resistance for all underground drainage pipes.
No.
Our other products
Reinforced building evacuation tube accessories with joint Ø100
Reinforced building evacuation tube to be bonded with glue Ø 100.
